RoHS – compliance to RoHS3 directive 2015/863/EU.CE-mark for compliance with EMC EN 55022:2010 (class A) and EN 55024:2010 in accordance with EU directive 2014/30/EU.The board requires 16 MBytes of address space.įireBird Quad CXP-6 conforms to v1.1.1 of the CoaXPress specification. It also generates Posted Writes for image data, thus achieving transfer rates in excess of 3.4 GBytes/sec, subject to host performance. PCI Express bus eight lane Gen2 interface to Specification Revision 2.0, with a max payload size of 512 bytes.įireBird Quad CXP-6 supports both Short (32-bit) and Long (64-bit) Address packets. The fan speed is linked to the temperature of the FPGA die for optimum cooling and noise level. The following I/O lines are provided for triggers, shaft encoders, exposure control and general I/O:Īll these I/O signals are provided on a 50-way header on the FireBird board.Īn 8-way PCI Express Graphics (PEG) connector is provided to connect to a 6 or 8-way PEG connector from the PC power supply. This is only needed for PoCXP. LEDs built into each BNC show the link status according to the CoaXPress specification.ĥ12 MBytes of DDR3 memory is fitted for buffering between the CoaXPress interface and the PCI Express bus.Ĩ-lane Gen2 interface typically providing 3.4 Gbytes/sec transfer from FireBird to the PC, subject to PC performance. Up to 17W is available to power cameras on each BNC via Power over CoaXPress (PoCXP), with 13W available at the camera according to the CXP specification.įireBird supports one camera using all four links, two cameras each using two links, or up to four cameras each using one link.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |